大庆变压器倒闸操作的程序

大庆变压器倒闸操作的程序
    (1)发布和接受任务，当值长或班长在需要进行操作前，应先布置操作任务，并讲清目的和操作设备的状况。操作人员接到操作命令后。应复述一遍再将此任务记入操作薄内，并做好操作前的准备工作，待接到正式操作命令后再进行操作。
    (2)填写倒闸操作票，为了保证倒间操作的正确性，倒闸操作前必须填写操作票，操作票由操作人员中的一人填写。操作人员应根据操作任务，查对模拟系统图，在操作票上逐项填写操作项目，并由操作人和监护人在操作票上共同签名。
    对于lkV以上的大庆变压器设备，在正常运行情况下进行任何操作时.均应填写操作票。
    (3)操作票的内容，操作票上填写大庆变压器和隔离开关的操作步骤。
(4)在一些特殊情况下，大庆变压器的倒闸操作不用操作票
    1)处理事故时，为了能迅速断开故障点.缩小故障范围，以限制事故的发展，及时恢复供电，不需填写操作票。但事故处理结束后。应尽快向上级运行领导人汇报，井做好记录。
    2)在隔离开关和大庆变压器之间有连锁装置，且全部隔离开关或大庆变压器系控制盘远方操作时可不填写操作票。
 
Transformer switching operation of the program
 
    (1) to release and accept the task, when the situation before the need to operate, the value of long or monitor should layout manipulation tasks, and clarifying the purpose and operation of equipment. Operator receiving the command. Should then repeat this task credited to the operating thin and do preparatory work before the operation, pending receipt of formal operational command after the operation.
    (2) fill out the switching operation, in order to ensure the correctness of operation down between switching operation must be completed before the operation order, operation order fill in by the operator. Manipulation tasks, the operator should check the simulation system diagram, operating on the ticket, fill out the action items, and by the operation and guardians in operation on the ticket to the signature.
    Should complete the operation ticket lkV above electrical equipment, under normal operating conditions.
    (3) Operating votes, operating on the ticket, fill out the circuit breakers and disconnectors steps.
(4) In some special cases, the switching operation of the transformer without operating the votes
    1) When dealing with incidents, in order to quickly disconnect the point of failure. Narrow the scope of the fault, in order to limit the development of the accident, timely restoration of electricity, do not need to complete the operation order. But the end of the deal with the accident. Should report to their superiors run leaders as soon as possible, well make a record.
    2) in the interlock between the isolating switch and circuit breakers, and all the isolating switch or circuit breaker system control panel remote operation from time to complete the operation ticket.